To connect and manage the OFSCN Fiber Bragg Grating Demodulator wirelessly using the WIFI method, you will need a WiFi router.
Simply connect the OFSCN FBG demodulator to the LAN port of the WiFi router and configure it following these steps:
1, Preparation Gather the OFSCN FBG demodulator, WiFi router, and Ethernet cable. Ensure that the power is on for both the OFSCN FBG demodulator and the WiFi router.
2, Connect the OFSCN Fiber Bragg Grating Demodulator Use an Ethernet cable to connect the LAN port of the OFSCN FBG demodulator to the LAN port of the WiFi router.
3, Configure the WiFi Router Log in to the management interface of the WiFi router. In the management interface, set the IP address range for the LAN port, such as 192.168.3.128 to 254. Save the settings.
4, Test the Connection Connect your computer or mobile device to the wireless network of the WiFi router. Open a web browser and enter the default IP address of the OFSCN fiber Bragg grating demodulator (e.g., 192.168.3.252). If you can access the management interface of the OFSCN FBG demodulator, the connection is successful.
Tips: You can also change the default IP address of the OFSCN fiber Bragg grating demodulator to a preferred network segment.
